Algus » SIMTEK tootevalik » SimMill PX, SX, UX, VX    
 Kaubagrupid
PUURIMINE
AVADE JÄRELTÖÖTLUS
KEERMESTAMINE
FREESIMINE
FAASIMINE (HEULE)
Pindrullimine (Burnishing)
Pinna rihveldamine (Knurling)
Stoosiv töötlus (Broaching)
TÖÖRIISTA KINNITUSED
SISETREIMINE
ANTIVIBRA treiterakehad
JAHUTUS + ÄRATÕMME
MÕÕTEINSTRUMENDID
DETAILI KINNITAMINE
Terade toorikmaterjal
MITSUBISHI CARBIDE tootevalik
SIMTEK tootevalik
  SimTurn AX
  SimTurn DX
  SimTurn GX
  SimTurn E12
  SimTurn FX
  SimMill A3
  SimMill PX, SX, UX, VX
  SimMill K2
  SimMill MX
  SimMill 9W4
  SimCut BA
  SimCut BF
  Simtek varuosad
TEHNILISED MÄÄRDED
NOGA kraadieemaldusriistad
NOGA (magnet-)jalad ja hoidikud
NOGA liigendjalad FOTO-sari
SAU toodete varuosad
Seadmed
Kruvikeerajad
Muud tooted
 Kiirotsing
Täpsem otsing

Abi
 Tootekood  Tootekirjeldus  Standard  Laos  Vaba laojääk  Pakend (TK) 
SI-M14HVW1AX M14.HVW1.A X800 Spets. 7.4mm / 52,5° terik NET  M14.R.7.0 23 23 10 
SI-P0601500212GX P06.0150.02.12.G X800 otsik Z/6 D11.7/W1.5-R0.2/Ap2.0mm  PD06.0/07.3 1 1 5 
SI-P0602000212GX P06.0200.02.12.G X800 otsik Z/6 D11.7/W2.0-R0.2/Ap2.0  PD06.0/07.3 2 2 0 
SI-P0607200110 M P06.0720.01.10 M X800 keermefrees Z/6 P=1.0-1.75 ISO M14min  PD06.0/07.3 0 2 0 
SI-P0615150210FX8 P06.1515.02.10 F X800 faasiterik Z/6 D9.7/S3.6 2*75° (k=15°)  PD06.0/07.3 4 4 1 
SI-P0630300210FX8 P06.3030.02.10 F X800 faasiterik Z/6 D9.7/S3.6 2*60° (k=30°)  PD06.0/07.3 2 2 1 
SI-P0645450210FX8 P06.4545.02.10 F X800 faasiterik Z/6 D9.7/S3.6 2*45° (k=45°)  PD06.0/07.3 4 4 1 
SI-P09454502FX P09.4545.02 F X800 faasiterik Z/3 D9.3 2*45° (kahepoolne)  PD06.0 4 4 1 
SI-P10015002GX P10.0150.02.G X800 terik Z/3 D9.7/W1.5(+0.02)-R0.2/Ap1.5mm  PD06.0 1 1 5 
SI-P10020002GX P10.0200.02.G X800 terik Z/3 D9.7/W2.0(+0.02)-R0.2/t1.5mm  PD06.0 3 3 0 
SI-P10025002GX5 P10.0250.02.G X510 terik Z/3 D9.7/W2.5(+0.02)-R0.2/t1.5mm  PD06.0 3 3 0 
SI-P12025002GX P12.0250.02 G X800 terik W2.5(+0.02)-R0.2/t2.5mm  PD06.0 3 3 1 
SI-P12030002GX P12.0300.02 G X800 terik Z/3 D11.7/W3.0(+0.02)-R0.2/t2.5mm  PD06.0 3 3 0 
SI-P12253001MX P12.2530.01 M X800 keermeterik P=2.0...3.0  PD06.0 2 2 0 
SI-P12454535FX8 P12.4545.35 F X800 kahep. faasiterik Z/3 2x45° Dmin=12,0  PD06.0/07.3 2 2 0 
SI-S06025002016GYX S06.0250.020.16.GY X800 otsik Z/6 D15.7-W2.5(+0.02) Ap=2.5  SD08.0 1 1 5 
SI-S0605100112MX8 S06.0510.01.12M X800 otsik Z/6 D12.0 ISO P=1.0-1.75 >=M16  SD08.0/09.5 6 6 5 
SI-S0608150113MX8 S06.0815.01.13M X800 otsik Z/6 D13.2 ISO P=1.5-2.75 >=M18  SD08.0/09.5 3 3 5 
SI-S0614231114MX8 S06.1423.11.14M X800 otsik Z/6 D13.7 BSW 11P/"-full  SD08.0/09.5 3 3 0 
SI-S0608160113MX8X S06.2530.01.13M X800 otsik Z/6 D13.2 ISO P=2.0-3.0 >=M18  SD08.0/09.5 2 2 5 
SI-S0630300214FF S06.3030.02.14 F GN39 otsik Z/6 D13.7 30+30° Ap=0.7  SD08.0/09.5 2 2 1 
SI-S0645450214FX8 S06.4545.02.14 F X800 otsik Z/6 D13.7 45+45° Ap=1.2  SD08.0/09.5 5 5 0 
SI-S14015002GX8 S14.0150.02 G X800 otsik Z/3 D13.7-W1.5/R0.2 Ap=2.5  SD08.0 1 1 5 
SI-S14020002GX8 S14.0200.02 G X800 otsik Z/3 D13.7-W2.0/R0.2 Ap=2.5  SD08.0 2 2 5 
SI-S14025002GX8 S14.0250.02 G X800 otsik Z/3 D13.7-W2.5/R0.2 Ap=2.5  SD08.0 6 6 5 
SI-S14051002MX8 S14.0510.02 M X800 otsik Z/3 D13.7 ISO P=1.0-full >=M16  SD08.0/09.5 4 4 0 
SI-S14081502MX8 S14.0815.02 M X800 otsik Z/3 D13.7 ISO P=1.5-full >=M18  SD08.0/09.5 3 3 0 
SI-S14100817AST S14.1008.17.A ST terakeha D8.0x17x60-S10mm IC  SD08.0 1 1 1 
SI-S14102002MX8 S14.1020.02 M X800 otsik Z/3 D13.7 ISO P=2.0-full >=M18  SD08.0/09.5 4 4 0 
SI-S14120856AHM S14.1208.56.A HM terakeha D8.0x56x120-S12mm IC  SD08.0 1 1 1 
SI-S14130825AST S14.1308.25.A ST terakeha D8.0x25x70-S13mm EC  SD08.0 1 1 1 
SI-S14132502MX S14.1325.02 M X800 otsik Z/3 D13.7 ISO P=2.5-full >=M20  SD08.0/09.5 5 5 0 
SI-S14160816AST S14.1608.16.A ST terakeha D8.0x16x80-S16mm IC  SD08.0 1 1 1 
SI-S14163002MX S14.1630.02 M X800 otsik Z/3 D13.7 ISO P=3.0-full >=M22  SD08.0/09.5 5 5 0 
SI-S16015002GX S16.0150.02.G X800 otsik Z/3 W=1.5(+0.02)/t=3.5/Ds=15,7  SD08.0 5 5 5 
SI-S16020002GF S16.0200.02.G GN39 otsik Z/3 W=2.0(+0.02)/t=3.5/Ds=15,7  SD08.0 1 1 5 
SI-S16020002GF1 S16.0200.02.G X800 otsik Z/3 W=2.0(+0.02)/t=3.5/Ds=15,7  SD08.0 2 2 0 
SI-S16025002GX S16.0250.02.G X800 otsik Z/3 W=2.5(+0.02)/t=3.5/Ds=15,7  SD08.0 7 7 5 
SI-S16081501MX S16.0815.01 M X800 otsik Z/3 ISO P=1.5-2.75/Ds=15,7/>=M20  SD08.0/09.5 6 6 0 
SI-S16111814MX S16.1118.14 M X800 otsik Z/3 BS28 P=14P/" full Ds=15,7  SD08.0/09.5 3 3 0 
SI-S16454545F S16.4545.45.F X800 otsik Z/3 D15.7 45+45° Ap=1.8  SD08.0/09.5 1 1 0 
SI-TE3010000GRX808 TE3.0100 G R X808 terik W=1.07+0,05/t=2.68  TE3.R.5.3 5 5 5 
SI-TE3013000GRH1 TE3.0130 G R X800 W=1.4+0,03/t=5.0  TE3.R.5.3 5 5 5 
SI-TF3002020D451200R TF3.2020.D.45.12 R terakeha 20x20 ST 45"  TF3 1 1 0 
SI-U06015001020G U06.0150.010.20 G X800 terik Z/6 D19.7/W=1.5(+0.02)/t5,0mm  UD09.0 2 2 0 
SI-U06020002018GT U06.0200.020.18 GY GT42 terik Z/6 D17.7/W=2.0(+0.02)/t3.5mm  UD09.0 5 5 5 
SI-U06020002020G U06.0200.020.20 G X800 terik Z/6 D19.7/W=2.0(+0.02)/t5,0mm  UD09.0 2 2 0 
SI-U06025002018GX U06.0250.020.18 GY X800 terik Z/6 D17.7/W=2.5(+0.02)/t4.0mm  UD09.0 2 2 0 
SI-U06030002020GYX U06.0300.020.20 GY X800 terik W=3.0(+0.02)-R0.2/t5mm  UD09.0 5 5 5 
SI-U06ST4002018Y U06.ST40.020.18 Y X800 kalasaba frees t=4mm  UD09.0 1 1 0 
SI-U18011000GX U18.0110 G X800 terik Z/3 D17.7/W1.24(-0.02)/Ap3.5  UD09.0 2 2 5 
SI-U18015042CD U18.0150.42 C HF25 terik W=1.5(+0.02)-R0.2/t3.5mm  UD09.0 2 2 5 
SI-U18020002GX U18.0200.02.G X800 terik Z/3 D17.7/W2(+0.02)/Ap3.5  UD09.0 3 3 0 
SI-U18025002GT U18.0250.02.G GT42 terik Z/3 D17.7/W2.50(+0.02)/Ap3.5  UD09.0 5 5 5 
SI-U18081501MF U18.0815.01 M X800 terik P=1.5-2.75mm (part) Z/3  UD09.0/12.0/13.0 3 3 5 
SI-U18120918AST U18.1209.18.A ST terakeha L2=18mm L1=65mm s-12mm  UD09.0 1 1 1 
SI-U18160918A U18.1609.18 A ST terakeha D9x18x80-S16mm IC  UD09.0 1 1 1 
SI-U18163001M U18.1630.01 M X800 terik ISO P=2.5mm part.  UD09.0/12.0/13.0 1 1 0 
SI-U18183501M U18.1835.01 M X800 terik ISO P=3.0mm part.  UD09.0/12.0/13.0 1 1 0 
SI-U18BS1102MF U18.BS11.02 M GN39 terik Z/3 D17.7 ISO P=11/" full  UD09.0/12.0/13.0 2 2 5 
SI-U20020002GX U20.0200.02 G X800 W2  UD09.0 3 3 0 
SI-V06005000037GX V06500.37 G X800 terik w=0.5 t=12mm  VD12.0 2 2 0 
SI-V06008000037G V06800.37 G X800 terik w=0.8 t=12mm  VD12.0 2 2 0 
SI-V06010001037GX V06.0100.010.37.G X800 terik Z/6 W=1 t=12.0mm  VD12.0 1 1 5 
SI-V06010001040GX V06.0100.010.40 G X800 terik Z/6 W=1 t=13.5mm  VD12.0 1 1 1 
SI-V06015001028GX V06.0150.010.28.G X800 terik Z/6 D27.7/W1.5(+0.02)/Ap6.5  VD14.0/14.3 2 2 0 
SI-V06015001040G V06.0150.010.40.G X800 terik Z/6 D39.7/W1.5(+0.02)/Ap13.5  VD12.0 4 4 5 
SI-V0601500202809GX V06.0150.020.28.09G X800 terik Z/6 D27.7/W1.5(+0.02)/Ap6.5  VD14.0/14.3 2 2 1 
SI-V06020002028GX V06.0200.020.28.G X800 terik Z/6 D27.7/W2.0(+0.02)/Ap6.5  VD14 4 4 5 
SI-V06020002035G V06.0200.020.35.G X800 terik Z/6 D34.7/W2.0(+0.02)/Ap10.0  VD14/14.3 2 2 1 
SI-V06020002037GX V06.0200.020.37 GY X800 terik Z/6 D34.7/W2.0(+0.02)/Ap12.0  VD12.0 3 3 1 
SI-V0602502025GX V06.0250.020.25.GY X800 terik Z/6 D24.8-W2.5(+0.02)/Ap5.0  VD14.0/14.3 2 2 0 
SI-V0602502028GX V06.0250.020.28.GY X800 terik Z/6 D27.7-W2.5(+0.02)Ap6.5  VD14.0/14.3 5 5 0 
SI-V06026502028GF V06.0265.020.28.G GN39 terik Z/6 D27.7/W2.76(+0.02)/Ap6.5  VD14.0/14.3 2 2 5 
SI-V06030002035GT V06.0300.020.35.G GT42 terik Z/6 D34.7/W3.0(+0.02)/Ap10.0  VD14.0/14.3 2 2 1 
SI-V06040002028GX V06.0400.020.28.G X800 terik Z/6 D27.7/W4.0(+0.02)/Ap6.5  VD14.0/14.3 1 1 0 
SI-V06060002028GYF V06.0600.020.28.GY GN39 terik Z/6 D27.7/W6.0(+0.02)/Ap6.5  VD14.0/14.3 1 1 1 
SI-V0607200122MX V06.0720.01.22.M X800 Z/6 terik P=1.0-2.0 ISO  VD14.3...16 2 2 5 
SI-V0625450122MX V06.2545.01.22.M X800 Z/6 terik P=2.0-4.5 ISO  VD14.3...16 3 3 5 
SI-V0630500128MX V06.3050.01.28.M X800 terik Z/6 D27.7mm P=2.5-5.0 ISO  VD11.3-16.0 2 2 1 
SI-V06454502022FT V06.4545.020.22 F GT42 terik Z/3 45+45°x3mm  VD11/12 jne 1 1 5 
SI-V06454502028FT V06.4545.020.28 F X800 terik Z/6 45+45°x3mm  VD14.3 3 3 0 
SI-V06G2Q6A-10 V06.G2Q6.A GN39 m2,0 terik Spec. 10tk/tell. NET  VD14.3 7 7 10 
SI-V06R10022FT V06.R100.22.F GT42 terik R=1.0  VD12.0 5 5 5 
SI-V06R30022FX V06.R300.22.F X800 terik Z/6 D21.7-R3.0 (servale)  VD12.0 10 10 5 
SI-V22000510VX V2205.10.V X800 Z/3 terik W=1.0-R0.5/t=4.5mm  VD12.0 2 2 0 
SI-V22000816V V2208.16.V X800 Z/3 terik W=1.6-R0.8/t=4.5mm  VD12.0 4 4 0 
SI-V22001530VX V2215.30 V X800 Z/3 terik W=3.0-R1.5/t4.5mm  VD12.0 2 2 5 
SI-V22002040VX800 V2220.40.V X800 Z/3 terik W=4.0-R2.0/t4.5mm  VD12.0 3 3 0 
SI-V22002550VT V2225.50.V GT42 Z/3 terik W=5.0-R2.5/t4.5mm  VD12.0 1 1 5 
SI-V22003264VX V2232.64.V X800 terik Z/3 D21.7-W6.4-R3.2/t4.5mm  VD12.0 1 1 1 
SI-V22010001GX8 V22.0100.01 G X800 terik W1.0(+0.02)-R0,1/t4.5mm  VD12.0 3 3 5 
SI-V22025002GF V22.0250.02.G GN39 terik W2.5-R0.2/t4.5mm  VD12.0 1 1 5 
SI-V22081501MF V22.0815.01.M GN39 Z/3 terik P=1.5-2.75 ISO  VD11.3...16 5 5 5 
SI-V22101110AST V22.1011.10.A ST terakeha d=10/l2=11mm L=60mm ST IC  VD11.3 1 1 1 
SI-V22102001MF V22.1020.01.M GN39 Z/3 terik P=2.0-3.75 ISO  VD11.3...16 4 4 5 
SI-V22131125AST V22.1311.25.A ST terakeha D11x25x70-S13mm ST IC  VD11.3 1 1 1 
SI-V22161224AST V22.1612.24.A ST terakeha D12x24x80-S16mm ST IC  VD12.0 2 2 1 
SI-V22161242AHM V22.1612.42.A HM terakeha D12.0x42x100-S16 IC  VD12.0 1 1 1 
SI-V22161260AHM V22.1612.60.A HM terakeha D12.0x60x130-S16 HM IC  VD12.0 1 1 0 
Kaubad 1 kuni 100 (kokku 118 kaupa) Eelmine Järgmine Lehekülg:  1 2  

   Copyright © 2009 Attila. All rights reserved.    
 
 
noom